Tips for Handling Water Damaged Electronics
9/12/2022 (Permalink)
Suppose your building was flooded, whether by a storm, or a burst pipe, then you will likely be dealing with quite a bit of damage. Along with the structure of the building and the furniture inside, your equipment can be affected as well. If you have flooded electronics, it is essential to handle them cautiously to prevent further damage. The following tips can help.
1. Remove Them From the Water Immediately
It is probably obvious that the first thing you should do is remove your electronics from the water. The longer they are submerged, the more damage they are likely to suffer. Quickly relocate them to a dry area to prevent additional problems from moisture.
2. Wipe Down the Exterior
While you are most likely more concerned with the inside of your flooded electronics, you should not neglect to care for the exterior. Use a towel or cloth to thoroughly dry the outside of any affected items to prevent corrosion. This also keeps any water on the outside from entering the device.
3. Do Not Turn Them On
It can be tempting to check the state of electronic damage by turning on your equipment, but this is not a good idea. Even if the outside is dry and it looks like it might be fine, moisture may be hiding on the inside. If you turn on your device before it has completely dried, this can cause even more damage that may make repairs impossible.
4. Have Them Inspected by a Professional
If your devices have been submerged in water, you need to have them examined by a professional to determine the extent of the electronic damage. In some cases, they may be able to repair them, saving you from the cost and frustration of having to purchase a replacement.
Flooded electronics are just one of several problems caused by water damage. If you need work done on your building, a clean-up and restoration service can do this for you. They can have your building back to its previous condition quickly and can salvage many of your damaged belongings.